AOZ1977
PCB Layout Consideration
Correct layout practices are essential for a working
design that will meet expectations. It is recommended to
use a two-layer board for the design. However, a single
layer board would be sufficient if basic layout rules are
followed. In any SMPS layout, external components
should be grouped into Power or IC control. From typical
application circuit, there are two GND symbols. The
striped one is for Power GND and the solid one is for
Signal/Control GND. Both symbols are connected to a
single point connection on the layout, All Power
connections should be as short and wide as possible in
order to reduce undesired parasitic inductance. The
output capacitors should be physically placed in the
current path between the SMPS and the load. Input
capacitors should be placed as close as possible to the
input side of the inductor. To prevent interference and
system noise, it is critical that the switch node connection
for boost switch, inductor, and output diode must be as
short and close as possible. A GND copper layer covers
the top layer to help shield the noise. For two-layer
board, it is essential that the GND plane under this
switching node should be filled and uninterrupted.
PWR GND
Connect PWR GND and
SGNL GND at 1 point
S SGNL GND
Single Point Connection Connecting PWR GND and Signal GND
Rev. 2.1 May 2012
www.aosmd.com
Page 13 of 16
相关PDF资料
AP-104-NT 12V PLUG TRANSFORMER EMPTY CASE
AP-120 PLUG AUTO LOCKING BLACK
AP-121 PLUG AUTO LOCKING BLACK W/LED
AP-124 12V AUTO PLUG STD EURO CE
AP-129 PLUG 12V AUTO EURO CE
AP-130 PLUG 12V AUTO LED SW FUSE CE
AP-131 PLUG 12V AUTO MINI FUSE CE
AP-132 12V AUTO PLUG ADPT-AIRCRAFT PLUG
相关代理商/技术参数
AOZ1978 制造商:AOSMD 制造商全称:Alpha & Omega Semiconductors 功能描述:Dual Channel High Voltage LED Driver IC
AOZ1995MI 制造商:Alpha & Omega Semiconductor 功能描述:IC DISPLAY DRIVER
AOZ2002PI 功能描述:Linear Voltage Regulator IC Positive Adjustable 1 Output Adj to 0.8V 2A 8-SO Exposed Pad 制造商:alpha & omega semiconductor inc. 系列:- 包装:带卷(TR) 零件状态:有效 稳压器拓扑:正,可调式 电压 - 输出:可调至 0.8V 电流 - 输出:2A 电压 - 跌落(典型值):0.18V @ 2A 稳压器数:1 电压 - 输入:1.3 V ~ 5.5 V 电流 - 限制(最小值):2.2A 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC(0.154",3.90mm 宽) 供应商器件封装:8-SO 裸露焊盘 标准包装:3,000
AOZ2003 制造商:AOSMD 制造商全称:Alpha & Omega Semiconductors 功能描述:3A Ultra Low Dropout Linear Regulator
AOZ2003PI 制造商:Alpha & Omega Semiconductor 功能描述:IC REG LDO ADJ 3A 8SO
AOZ2013PI 制造商:Alpha & Omega Semiconductor 功能描述:IC REGULATOR
AOZ2023PI 功能描述:Linear Voltage Regulator IC Positive Adjustable 1 Output 0.8 V ~ 6 V 3A 8-SO Exposed Pad 制造商:alpha & omega semiconductor inc. 系列:- 包装:带卷(TR) 零件状态:有效 稳压器拓扑:正,可调式 电压 - 输出:0.8 V ~ 6 V 电流 - 输出:3A 电压 - 跌落(典型值):0.18V @ 2A 稳压器数:1 电压 - 输入:1.3 V ~ 5.5 V 电流 - 限制(最小值):- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC(0.154",3.90mm 宽)裸焊盘 供应商器件封装:8-SO 裸露焊盘 标准包装:3,000